Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Shiny New Toy!

Kevin Winter

Well-Known Member
Dec 10, 2008
1,958
559
138
Just collected a shiny RT Mag from Yorkie, thought I'd show it off...

At the moment, it doesn't cycle, but was working a short time ago. Any suggestions as to where to get spares etc and how to bring it back to life much appreciated!

 
  • Like
Reactions: Sid Sidgwick

Gee Tee

1/2 man - 1/2 pogo stick
Mar 21, 2007
3,172
786
148
Dartford, UK
Nice find - that's got the rare euro powerfeed body, and not generally available on the RT Mag. Check all the seals as these may have perished if it's be sat unused for years. Mags like plenty of oil and often that's as much as it takes to get them working. Make sure you have a full air bottle at 800 psi, as the RT valve won't cycle on low/med pressure bottles. To get the RT (reactive) trigger to function well you need 900 psi plus.

Seal kits can be shipped over from the states and also found on ebay

http://www.ebay.co.uk/itm/AUTO-MAG-AEG-SPARE-PARTS-O-RING-SPRING-KIT-NEW-/181208452149?pt=UK_Sporting_Goods_Paintballing&hash=item2a30dd8c35

http://www.ebay.co.uk/itm/AUTO-MAG-68-AIR-GUN-DESIGNS-PARTS-ALL-NEW-/380521878423?pt=UK_Sporting_Goods_Paintballing&var=&hash=item5898df1397

The classic RT is capable of 23 bps when set up properly

 

Kevin Winter

Well-Known Member
Dec 10, 2008
1,958
559
138
I seem to remember a discussion on here about some cheap adjustable regs - anyone got any advice as to where to get hold of one?
 

longi

Active Member
Mar 16, 2008
131
9
28
You could pick up a Ninja SHP reg, which is you're best bet. They're sort of adjustable in 3 stages of output pressure (850-950-1050 psi). No one makes fully adjustable regs anymore like the Centerflag Dynaflow or the old Smart Parts Max Flo. The Max Flo requires a purge valve so you can de-gas it properly otherwise it's a pain to de-gas unless you know how to on a Mag and possibly dangerous.
 

longi

Active Member
Mar 16, 2008
131
9
28
Nice find - that's got the rare euro powerfeed body, and not generally available on the RT Mag. Check all the seals as these may have perished if it's be sat unused for years. Mags like plenty of oil and often that's as much as it takes to get them working. Make sure you have a full air bottle at 800 psi, as the RT valve won't cycle on low/med pressure bottles. To get the RT (reactive) trigger to function well you need 900 psi plus.

Seal kits can be shipped over from the states and also found on ebay

http://www.ebay.co.uk/itm/AUTO-MAG-AEG-SPARE-PARTS-O-RING-SPRING-KIT-NEW-/181208452149?pt=UK_Sporting_Goods_Paintballing&hash=item2a30dd8c35

http://www.ebay.co.uk/itm/AUTO-MAG-68-AIR-GUN-DESIGNS-PARTS-ALL-NEW-/380521878423?pt=UK_Sporting_Goods_Paintballing&var=&hash=item5898df1397

For some reason the seller doesn't sell the RT/X valve spares kit which is a shame, which as you say means shipping them from the U.S. Doh!
 

Kevin Winter

Well-Known Member
Dec 10, 2008
1,958
559
138
Cheers guys - picked up a maxflo reg a few weeks back, just need to find time to transfer it to a bottle and test it out :)
 

renie

Well-Known Member
Mar 2, 2008
2,575
824
138
There are some cheap 1200 psi ones on ebay and they make the mag rip
Though you will need a level 10 bolt if you go up that high otherwise your have a blender :)