Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

all fixed :)

mike "nemo" berry

Active Member
Feb 5, 2013
112
8
28
So I tried to chrono my mini yesterday and it wouldn't chrono anywhere above 265
Any ideas? Reg pressure is at 200 and I reset the board the it was on stock dwell. Help please
Thanks
Mike
 

BDN

Active Member
May 24, 2008
215
23
28
NW England
Start with operating pressure 180 & the back-cap screwed all the way in.

Over a chrono, turn the back-cap out 1/4 turn at a time firing a few shots between. At some point, you should find the velocity stops increasing.
 

MeDiC

Well-Known Member
Dec 8, 2010
636
231
68
What's your dwell set to ?

Stock should be I think 28 blinks on the Optimus board (6/7ms iirc)
 

fishleg003

Active Member
Oct 13, 2011
139
10
28
Check your barrel and back cap screw if the paint is no where near the bore size of the barrel the paint wont get all the air behind it. When you get stuff like this just do a blow test, paint in barrel use it like a pea shooter if it just drops out without even blowing then its probably your barrel to be honest.