Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

any Axe expert on here?

roy2k14

FE
Oct 13, 2014
208
34
48
East Midland, United Kingdom
Its regard to the female air transfer tube, I know there is a little oring on the tip of it but when I had the parts back from anno I realised that the oring was fitted inside the Asa and too big to fit on the tube. Not sure if its safe to air it up but it seems the oring will still stop air from leaking out between the ASA and the transfer tube. Just want to be sure if this is fine, I don't have any spares at the minute and need the gun for the weekend. Also I can't screw the female tube all the way into the frame otherwise it will pushes the ASA rail further out leaving a gap between the frame and the asa, so I just screwed it in about 90% to fit the asa on properly is this like normal or...?
 

roy2k14

FE
Oct 13, 2014
208
34
48
East Midland, United Kingdom
Well just like how I have described it, although I think it was like this before I took it apart and before then it had no issue air'ing up and shoots great so I'm not too sure whether this will be an issue, I haven't air up the marker yet as bolt need to be lubed as just got it back from anno
DSC_8756.JPG
DSC_8758.JPG