Creed leak

[jozo]

I have a problem with Creed,
he is leaking at the front hole of the solenoid and sometimes stops when the LPR is flushed or out ..
Another issue is the efficiency and spends a lot of air (200 balls/2000psi)-this is the moment when he is not leaking
any idea??

 

[jozo]

@foot

 

[foot]

It's more likely a loose or broken Schrader valve in the lpr or it's the 2 15x2 orings on the lpr body.

Let me know how you get on.

 

[jozo]

i think it is schrader valve but how can I be sure?
I changed all the orings , when I turn only the hpr by one turn it doesnt leak but when I turn lpr fushed and shoot cuple time it start to leak
btw it is the vanguard creed Frankenstein from you

 

[jozo]

when I push schrader in, it came back normal, but when I push schrader with lpr piston it is struggling to come back

 

[Mclovin101]

Is it lose

Can you turn it with your fingers

 

[jozo]

I remove it with tweezers and put it back but stil the same, leaks when I turn lpr in more then flushed

 

[Mclovin101]

its a creed

im sure foot can sort u out

 

[jozo]

hope so
tnx

 

[foot]

If you wind the lpr all the way out does it still leak from the solenoid when gassed up.

If yes, the problem is with the LPR
If no, The problem is solenoid/manifold/ram related

Bad efficiency may be down to the regs being un ballanced?