Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Creed Leak

Icepick

Well-Known Member
Jan 10, 2014
779
50
63
Bournemouth
Well when the screw on the lpr is wound out all the way it leaks still but its when i unscrew the lpr body that is stops leaking ok i will try replacing the two orings on the lpr body now cheers mate
 

Icepick

Well-Known Member
Jan 10, 2014
779
50
63
Bournemouth
I think ive seen what it is now. At the back of the lpr reg there is a plastic cap with a small o ring on it that has a small nick in the plastic could that cause a leak?
 

foot

Now I originate.............
Jan 6, 2009
8,902
1,396
248
Crystal lake
No, that's there as a guide for the spring.
You can run your gun without that piece if needed.
 

Icepick

Well-Known Member
Jan 10, 2014
779
50
63
Bournemouth
No, that's there as a guide for the spring.
You can run your gun without that piece if needed.
Hi foot any advice? I have just replaced the lp on the creed. When i wind it in it leaks where the rammer is. I have also replaced the poppet with a new one. Any idea what else could be wrong? Thank you
 

foot

Now I originate.............
Jan 6, 2009
8,902
1,396
248
Crystal lake
If it now only leaks when you wind the lpr in it can be a number of things.
Bad solenoid gasket
Inner valve body oring (British standard not metric)

The poppet was never the issue with what you described.
 

Icepick

Well-Known Member
Jan 10, 2014
779
50
63
Bournemouth
If it now only leaks when you wind the lpr in it can be a number of things.
Bad solenoid gasket
Inner valve body oring (British standard not metric)

The poppet was never the issue with what you described.
Cheers foot only reason i changed vanuards said it might be an issue. Any tips for changing the gasket?
 

Icepick

Well-Known Member
Jan 10, 2014
779
50
63
Bournemouth
If it now only leaks when you wind the lpr in it can be a number of things.
Bad solenoid gasket
Inner valve body oring (British standard not metric)

The poppet was never the issue with what you described.
Tried the gasket put a little lube on it and replaced it didn't help. I will try the inner valve body orings. There are just two if i'm correct?
 

foot

Now I originate.............
Jan 6, 2009
8,902
1,396
248
Crystal lake
Did you change both gaskets?

Make sure you use british standard 0rings on the valve body where needed and not metric.