CS1 won't fire on ramping

[roy2k14]

I could give it a try, I know it's definitely a marker problem. When I click the trigger without paint or air and I can hear the noid clicks on a semi firing mode speed and that's with the eyes on. And with the eyes off it clicks as fast as ramping mode. Hope this make sense to you.

 

[NitroBall]

Possible fault with the eyes ?
Have you checked the wires on the eyes, no kinks, eyes securely seated, and make sure connection is properly seated into board ?

 

[roy2k14]

Checked the eyes already, can't see anything wrong with the wires and all connections looks fine to me

 

[STONESOLDIER]

Have you changed your eyes of ROF to the same as the eyes on ROF ?

 

[STONESOLDIER]

Jack wood says

"Possibly an issue with the opto trigger. Try it in micro and make sure it is clicking properly"

 

[roy2k14]

The ROF for eyes on and off is both 10bps, everything is pretty much factory setting with MS 10 preset and already set to micro switch. It clicks properly as it can ramp to 10bps dry firing with eyes turned off.

 

[roy2k14]

Also noticed, after the first shot the eye go straight into a pair of square bracket instead.