Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Dm 12

jamie perrett

playing for nexus kids
May 6, 2014
152
21
38
25
london
over the chrono my 12s velocity seems to be inconsistent jumping between 313 and 267
It's got a new battery In it
All oring are in good condition and correctly lubed
Lpr settings are 4 and a half turns out
Hpr setting are 5 and abit turns out
Paint is gi 3 star in good condition



Any suggestions would be appreaciated
Thanks
 

DYE Euro Tech

DYE Tech
Mar 15, 2010
149
43
38
did you set the HPR or the LPR down while there was pressure on your DM? That can destroy your reg seats cause you screw metal against rubber.
I would say the same like ash, check the seats again, if they are fine my next step would be checking the paint size, about 50 fps is normaly the paint
 

jamie perrett

playing for nexus kids
May 6, 2014
152
21
38
25
london
i degas the gun and wait for the pressure to be released till i make changes to the hpr or lpr
i tried the paint in a different gun with the same barrel and the fps jump wasn't as much as the 12
i am at training with ash on sat so if its still acting up then we can think of something
did you set the HPR or the LPR down while there was pressure on your DM? That can destroy your reg seats cause you screw metal against rubber.
I would say the same like ash, check the seats again, if they are fine my next step would be checking the paint size, about 50 fps is normaly the paint