Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Does it work? 300bar high pressure compressor

BOD

The brotherhood
Aug 1, 2003
747
232
68
YORK
Visit site
My concern would be the lack filters to clean oil and moisture from the air. I also think they may not last long if it's just a single stage compressor.
 

Tom

Tom
Nov 27, 2006
4,076
1,210
198
Salisbury
www.TaskForceDelta.co.uk
There isn't really a shortcut to compressed air


Bod has pointed out the vital issues of filters, we ideally require 'breathing quality' air, not because we would breath from it as per scuba divers, but still due to concerns with contamination of the air in the cylinder. The best case scenario is that it affects the regulator and we blow a burst disk early, the worst case scenario is a contamination flash fill explosion

Another attempted shortcut to high pressure air was the 'shoebox compressor' a few years ago. This worked as a secondary booster, you would need a workshop compressor feeding into it about 100psi or higher, which it would then boost to 4500psi ...... but take hours or days, and overheat whilst doing it, and again its unfiltered

These are a solution to a specific problem for people who are in true remote locations and cannot get access to compressed air easily

If you're after some exercise then a pcp stirrup pump can be used .... they are relatively cheap, but you would also need to make sure it has a filter and the right fittings

Ask yourself why you need access to your own compressed air, and what options you have around
fill at the sites you play, and if necessary invest in a couple of spare 3000psi aluminium cylinders and fill them all when on site
If you are away from sites and have good safe suitable land then the next best thing is a scuba cylinder and a fill rig
Buy a fill at a dive shop etc and then fill your cylinders from that