i have a ego 09 and no matter how low i cap my marker at it always seem to go up to 12 bps need help with what the problems can b plz i have no idea so not done any thing thanks john
Are you changing both the BBSS On ROF AND the BBSS Off ROF? How are you testing the rof, using the indicator on the board? Because if you're dry firing and using the peak/average rof counter on the board you might want to reset it (hold down for half-a-second) and make sure the the Eyes off setting is at 10 as well?
Morning John, Further to our phone call a moment ago, please can you confirm the version of firmware that is installed in your Ego9 circuit board. You cam find this out by pushing and holding the power-up button when turning the marker on, until the version number is displayed. Also, the advice posted above by StewartW regarding resetting the counter is good. Please ensure that you have done this. Nicky T
when iv done the bord thing it says its ussing the standerd ver 1-10 i am displaying avg rof mode is ramp rof cap is on max rate off fire is 9.5 off rof is 6.0 and i have reset it and it just goes bk to 12 bps mate any clue what i can do
Hi John, Please just follow the advice that i gave you yesterday over the phone and send the marker in to have the software updated. Nicky T
i will do mate put this on befor i phoned you yesterday lol thanks for all the help i used b a big dye fan but changed to eclipse now and the feel from the nt i had to the ego 09 is much better thankz for the advice john
