Hi guys, I am hoping you can help! I have recently purchased an ego 11 of the forum. I have air'd it up and to a point where I can shoot, however when I pull the trigger the bolt cycles but does not enough air pressure to get a ball down the barrel. I have read a previous post which sounded similar and from this I have factory reset the settings, cleaned and reset both the LPR (out to flush then 2x full turns in)& Hpr (all the way to flush, then 4 turns in) set the SFR To 5&7, brand new Duracell and cleaned and checked the rammer. Came back to try again, but exactly the same. Can you help? Is there anything I have missed?