Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Ego Solenoid

Rosie

Well-Known Member
Aug 30, 2002
1,677
5
63
Nottingham
John C said:
Rosie.

Its the black wire that you want to splice.

Firstly, using a sharp knife or pick, remove all the crimped wires from their housings. Carefully bend the white pegs up and gently pull the wires out.


See how on the ego connector it goes black red black red?
Well we want to use the DM4 eyes with the order black white black red.
So we need to turn the single black wire into two black wires.


To splice the wire cut the end off a few centimeters from the crimp.

Now you need to solder two crimped ends on to the black wire, use the one you have just cut off, and another one from the ego eye loom.

Basicly twist all 3 wires together then solder as neatly as possible, then afterwards heatshrink the solder joint.

Now put the crimps from your '4 wire DM4 loom' into the 4 way housing from the ego eye wires.

I hope I have explained that clearly, if not I will do you a ghetto diagram in MS paint :p
Woooo!
I did it!!

http://putfile.com/pic.php?pic=main/7/19916544864.jpg&s=f10

http://putfile.com/pic.php?pic=main/7/19916590064.jpg&s=f10

http://putfile.com/pic.php?pic=main/7/19917045839.jpg&s=f10

I now have 1/2 m of heat-seal stuff I will never need again- anyone want it ;)?

I laid out everything I've got so far; it may not look a lot but I only need 3 things:
body (it can have a threaded-out front reg hole as Strawb is making me a custom reg mount thingy)
solenoid inserts (what??)
screws & seals & lube for body (which I believe can be bought in a kit?)

So far, I've only spent £49.....just those 3 bits left to get, thank you to so many people :), if you ever need anything you know where I am- I wouldn't have been able to do it without you, also thanks for all the advice from people on this thread & general, John C, Skeet, Strawb, Demonic69, much <3!

Paid for
Reg- (using ion reg) £15, -Mike from Brum
manifold, Frame & board £25 –Deker
NDZ Bolt guide- rentonc £9

FREE!!!
feedneck- FatTart
bolt & firing can, ego eyes- Rentonc
bolt sleeve- shifty26
solenoid & top board- Fly
DM4 eyes + battery switch – Robbo
solenoid board connector – John C
carbon fiber trigger- dead snakey

On the way (free again!)
ego screws – mdking
ego board buttons- S1im


PS just realized; put the eye-loom crimps in upside down & it's the wrong order :eek:

and! how do I test they they're both working?

and...I can't manage to get the trigger right...don't know if it's meant to have a spring or something; all that's there is the trigger & the pin in the frame, & lots of grub screws :D
 

Skeet

Platinum Member

Rosie

Well-Known Member
Aug 30, 2002
1,677
5
63
Nottingham
No still not sourced a body; it's holding me back really, tsch :rolleyes:

had a couple of people offer me one, and then never PM back, etc.

So, most bodies come with the solenoid inserts then? Ok one problem solved.
I can get a new body from Fly, but I want to see if a cheap 2nd hand one comes along first ;).

Demonic yeah, I've got someone to do that for me (very kind!) :p, I might never even see an aluminium shaving