NT10 breaking paint

[Gonzo47]

Hello,
Last weekend played and had trouble with paint breakage. Don't get clearly what was the issue or why.

Tried to use a bigger insert( the ball was going free ), set the fps down to 265- 278 but had same problem- the orange rain out of the barrel. Specially when was holding lines non stop. When was shooting one by one- everything was fine, but when rof went up, same thing- the orange rain out of the barrel.

I was shooting "G. I. Sports * * *".
Any ideas what to do?

Thank You

G.

 

[EELZ]

try setting the pressure at 110-120 psi and lower your dwell a little, remove any spacers and put the blue bolt tip insert in, this should help with brittle paint.

Also- check your eye pipe

If you haven't got one already- buy a reg pressure tester( £20)

 

[JackAdams96]

it may have just been the paint, ive heard this problem with mates who have had NT's

 

[john shelley]

That's why I got rid off mine it was always breaking paint no matter what I did

 

[WingNut]

I would also try another loader.

Just to eliminate that.....



online via my uber funky Galaxy Note III

 

[sd_dragao]

Blue tip, no spacers and dwell at 10 should fix the problema.

check the eyepipe and put an size down o`ring on front off he bolt. ( 014 to 013, if colored blue to yellow )