Hey everyone,
I recently bought a second hand PMR with tadeo board, as soon as I gassed it up it started leaking air from just above the trigger.
I found the regulator in to stop the air, traced it to solenoid gasket. Greased it down.
Turned it out 2 turns and no air leak, however when I turn it tp 2.5 to increase the velocity I am getting an air leak from around the trigger area.
It is not any of the o-rings on the bolt, they all looked ok, but I renewed them all just to be safe.
Any ideas?
I recently bought a second hand PMR with tadeo board, as soon as I gassed it up it started leaking air from just above the trigger.
I found the regulator in to stop the air, traced it to solenoid gasket. Greased it down.
Turned it out 2 turns and no air leak, however when I turn it tp 2.5 to increase the velocity I am getting an air leak from around the trigger area.
It is not any of the o-rings on the bolt, they all looked ok, but I renewed them all just to be safe.
Any ideas?
