Planet Eclipse Warped Sports Manic Paintball Just Paintball G.I Milsim Tipmann BZ Paintball DYE Paintball

Vanguard creed leak

Discussion in 'Tech Troubles' started by funder, Apr 20, 2017.

  1. funder Active Member

    funder
    Joined:
    Aug 14, 2008
    Message Count:
    105
    Likes Received:
    0
    Trophy Points:
    26
    My vanguard creed has got a leak from the trigger area. I've tried to fix it but made it worst . It had a new poppit fitted last year by a tech guy. The air leak happens as soon as I put my bottle on
    Help plz
     
  2. sl2ai Team Marvel

    sl2ai
    Joined:
    Jul 2, 2010
    Message Count:
    259
    Likes Received:
    42
    Trophy Points:
    38
    Usually that the noid when its leaking from there, it could be too much pressure have you tried turning the HPR down a bit?
     
  3. funder Active Member

    funder
    Joined:
    Aug 14, 2008
    Message Count:
    105
    Likes Received:
    0
    Trophy Points:
    26
    The hpr is set to 1 turn out.
    I've changed the noid with my other gun and both leak on this creed but not the other.
     
  4. sl2ai Team Marvel

    sl2ai
    Joined:
    Jul 2, 2010
    Message Count:
    259
    Likes Received:
    42
    Trophy Points:
    38
    hows the battery charge?
     
  5. Big_jim Team PUPS/PBM

    Big_jim
    Joined:
    Feb 10, 2010
    Message Count:
    859
    Likes Received:
    183
    Trophy Points:
    78
    Change the orings on the lpr body. If they have degraded or been damaged while removing the lpr from the body the gun will leak from the noid.
     
  6. Big_jim Team PUPS/PBM

    Big_jim
    Joined:
    Feb 10, 2010
    Message Count:
    859
    Likes Received:
    183
    Trophy Points:
    78
    Failing that the Internal hoses have rotted and need replacing. It's one of these two things.
     
  7. funder Active Member

    funder
    Joined:
    Aug 14, 2008
    Message Count:
    105
    Likes Received:
    0
    Trophy Points:
    26
    The battery has been changed for a new one with full power.
    The lpr rings are new softer ones that are ment to seal better. They are new
     
  8. Big_jim Team PUPS/PBM

    Big_jim
    Joined:
    Feb 10, 2010
    Message Count:
    859
    Likes Received:
    183
    Trophy Points:
    78
    Is that something you tried before the leak occurred or did you change them because it was leaking?
     
  9. Narkadox The Man With The Golden Gun

    Narkadox
    Joined:
    Jan 3, 2013
    Message Count:
    292
    Likes Received:
    57
    Trophy Points:
    48
    I had a leak from around the trigger recently on my Creed. Stripped and cleaned everything, checked all the orings, swapped the noid, replaced the gasket, was still there.

    Turns out it was coming from the Barb fitting on the Manifold plate (where the internal hose that brings air from the LPR to the Solenoid is connected).
     
  10. funder Active Member

    funder
    Joined:
    Aug 14, 2008
    Message Count:
    105
    Likes Received:
    0
    Trophy Points:
    26
    The seals were changed while it was being fixed.

    Forgot to say it a v1 creed
     

Share This Page

Planet Eclipse Warped Sports Manic Paintball Just Paintball G.I Milsim Tipmann BZ Paintball DYE Paintball