y-board help

[le-pig]

trying to fit a new board in my egg,ive taken out all the screws and taken off the lid,but it wont come appart.is there anything else i need to do,or does it just need a damn good thrashing
ta dave

 

[L J]

thrash it mate, it comes apart easy peasy just double check over all the screw holes

 

[Dark Warrior]

Some of them are hard to seperate mate
You just have to force it, but be extremely careful
you know how fragile the shells are.

 

[le-pig]

hmmmmm,got it appart and put the board in,got it back together again but the battery door wont shut,it's like the batterys are to long as the door shuts when there not in

 

[Parksy]

Push the battery connectors down a bit mate, a bit of pressure does the job :

Had the same problem with mine, still a tight squeeze though even after pushing them down

Dave

 

[Skeet]

Very tight sqeeze..mmm...nice...
anyway, check that the on/off operates properley, as on mine it wasnt central and wasnt always making contact properley, stick a blade in the hole and take some meat out...also bit of sellotape over the inside other hole that had the speed dialler in it would be good

 

[le-pig]

ta thats what i was going to do
skeet
it has a speed control,light and a on off switch ,all fit ok

 

[Parksy]

Originally posted by le-pig
it has a speed control,light and a on off switch ,all fit ok

Skeet is thinking it is a z board mate which has no speed controller so leaves a gap in the shell where it was on the original and y boards

 

[Skeet]

didnt read it properley mate!
get a z board!!!

 

[le-pig]

not a bloody chance of me going through that again
but it works now