Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

HELP! ion trouble!

The armature is the little pin that goes into the solenoid housing. You need to remove the bracket to get the armature out. Leaver the bracket off with a flat headed screw driver. **make sure you do not damage the coil around the housing when doing this**

Its probably a bit of crap inside the housing or sat on the face of the armature.

http://www.zdspb.com/media/ion/solenoid_ping2.JPG
 

badd701

EGO = GOD
Jul 5, 2006
271
0
26
nailsea,bristol
its not the armature as i have tryed the one from my stock board

i cant find a single thing wrong with any of it it just wont flippling work wich i dont understand as it worked fine the day before and just doesent now :S

any way it could be anything to do with the dwell settings or any other setting on the board?
 

Omar Serna

New Member
Sep 14, 2017
1
0
1
39
California
My ion is leaking from the vent hole of the solenoid so i took it apart and my armature is no good. Any idea as to where I can get one?