06 cyborg hp or lp

[jack_judge]

if its not cycling the lpr is too far out i had this problem when shipping it it was working fine but during the post it set the hpr to 0 trying screwing your lpr in if that doesnt work make sure your hosing isnt falling off from the lpr to the noid but it depends what issue you have myne didnt have this hosing.

http://members.iinet.net.au/~chdw/borgfocus/06bolt.html

 

[stevie t]

ok have screwed the lpr all the way in and doesnt seem to do anything

 

[jack_judge]

what about the hosing? and whats your hpr pressure at?

 

[jack_judge]

Also is the lpr assembled properly as that would explain it being screwed in all the way and not cycling

 

[stevie t]

hpr is at 180 and hosing looks alright to me, lpr looks ok to me aswell not great with markers though.

 

[jack_judge]

hpr should be at 300

 

[stevie t]

so the little mini reg should be reading 300 not 180, also just looked again and should there be a hose going from the noid straight to the lpr?

 

[jack_judge]

well try it at 300 and back the lpr out and screw it in cycling it degas it thoguh when you adjust the hpr im not sure if it goes straight across try airing it up with the frame off of the body if it looks like the noid is buggered send it back

 

[stevie t]

not going to touch it anymore am talking to the tech now will see what he says cheers for the help though.

 

[jack_judge]

ok mate