changeing lense on NVader
- Thread starter ally
- Start date
Dissasemble the mask so you're left with just the lense inside the goggle frame, then pull up the surrounding goggle frame from the lense tabs. Work your way around the goggle frame till its out.
To reasemble the easiest way is to leave the goggle frame in some hot water for about 10 mins as this will make the plastic more flexible.
Hope that helps,
Paul.
Ally:
you do get instructions with the goggles/lenses... anyhow as you're playing with the Skulls; ask one of them nicely and they'll show you.
you do get instructions with the goggles/lenses... anyhow as you're playing with the Skulls; ask one of them nicely and they'll show you.
Its soooooooooooo easy!
The nVader is the easiest mask in the world to change the lens on, wouldn't even bother with soaking it or anything, just get the goggles bit off from the rest of the mask then just pop the goggles fromt he tabs arround the lens.
Start at the top middle and work your way down and round with the nose pieces last.
Richard
The nVader is the easiest mask in the world to change the lens on, wouldn't even bother with soaking it or anything, just get the goggles bit off from the rest of the mask then just pop the goggles fromt he tabs arround the lens.
Start at the top middle and work your way down and round with the nose pieces last.
Richard
Its soooooooooooo easy!
P.s. Used to own an nVader, loved it to bits, only got rid of it when it started to fall apart.
P.s. Used to own an nVader, loved it to bits, only got rid of it when it started to fall apart.