it seems there is light at the end of the tunnel after all.
read this taken from the store section on planet regarding the cure 2.
Description
Read Tech Info below for Compatibility questions.
Technical
The issue: The Cure2 Bolt comes fitted with the same bolt pin that is used on Ego8 and SL8r. The head of this pin sits lower to the body than previous pins, in order to fit in with the lower profile machining of the 08 model range. This lower pin head can cause an issue with some of the older models. The pin head can rub on the top of the body.
There is no issue with:
Etek2 Standard
Ego5 Standard
Ego5 XSV
Ego6 XSV
Ego7 (+ all Custom Bodies, Vicious, Pevs etc)
Ego8 (+ all Custom Bodies, Vicious, Pevs etc)
Problem Models:
Etek Standard
Ego5 Nexus
Ego6 Standard
Ego6 Nexus
SL66
Solution: The standard pin out of any of the non-conforming guns can be fitted to the Cure2 in order to get it to function without any rubbing.
read this taken from the store section on planet regarding the cure 2.
Description
Read Tech Info below for Compatibility questions.
Technical
The issue: The Cure2 Bolt comes fitted with the same bolt pin that is used on Ego8 and SL8r. The head of this pin sits lower to the body than previous pins, in order to fit in with the lower profile machining of the 08 model range. This lower pin head can cause an issue with some of the older models. The pin head can rub on the top of the body.
There is no issue with:
Etek2 Standard
Ego5 Standard
Ego5 XSV
Ego6 XSV
Ego7 (+ all Custom Bodies, Vicious, Pevs etc)
Ego8 (+ all Custom Bodies, Vicious, Pevs etc)
Problem Models:
Etek Standard
Ego5 Nexus
Ego6 Standard
Ego6 Nexus
SL66
Solution: The standard pin out of any of the non-conforming guns can be fitted to the Cure2 in order to get it to function without any rubbing.