dye nt airport pin housing

[helder]

hi there

im having a small problem with a leak coming from the bleed hole in the air port, i have took it apart and noticed that the pin housing no mater how long i tighten it for its always loose is this normal or are the treads gone

thanks for your help

 

[DYE Euro Tech]

Hi There,

The pin housing shouldnt keep turning, but that wont cause your leak provided it's screwed all the way in and the pins in correctly. If there is no damage to your bottle thread, or pin and pin housing it should be just a case of either replacing the oring on the bottle thread, or replace the small yellow oring inside the the pins housing.

If there are any further questions feel free to get in touch again, and if replacing the orings doesn't solve it sending us your marker for a repair is also an option.

Best Regards

 

[helder]

thank you for your help ill try to replace the o-rings you mentioned and see how it goes

thanks