nuh he lives in kingston, only prob is he works allot but when u can catch him i recommend u do, probably best to drop by the wurzel bash. Sorry i dont have his number on hand but hes never home anyway :/
Eblade...Advanced setup?
- Thread starter Skeet
- Start date
CON is at 65 atm...do i swithch the eye on while setting this up or what? is there anything missing from the 24 bps settings?
SHEEEEET!!!
That sounds very fast!!!! With the eye off, I would say im doing 18, looking at the shot counter go up...I assume that should be faster with paint?
If im feeding paint at 20 BPS....I should be able to shoot that, as I have just over 4 bps margin....i have more oppertunities for a shot per second than I can feed so all should be well?
Impressed...Cheers!!!!
That sounds very fast!!!! With the eye off, I would say im doing 18, looking at the shot counter go up...I assume that should be faster with paint?
If im feeding paint at 20 BPS....I should be able to shoot that, as I have just over 4 bps margin....i have more oppertunities for a shot per second than I can feed so all should be well?
Impressed...Cheers!!!!
answer is:
Doesnt work with paint...eye on is slow...eye off...doesnt shoot the paint so cant be getting into the barrel.
the settings were.
CON 22
COFF 15
CDEL 04
TPUL 02
TREL 02
Anyone got any suggestions...maybe the COFF setting is too low...cant really try it much with paint because of the neighbours.
Again...being fed by Z board Egg2
.
Doesnt work with paint...eye on is slow...eye off...doesnt shoot the paint so cant be getting into the barrel.
the settings were.
CON 22
COFF 15
CDEL 04
TPUL 02
TREL 02
Anyone got any suggestions...maybe the COFF setting is too low...cant really try it much with paint because of the neighbours.
Again...being fed by Z board Egg2
.
SON=4
COFF=12
CON=15
CDEL=3
giving a MROF at 33.33 BPS!!!
This is theoretical as every marker is slightly different, but why not try it and see
COFF=12
CON=15
CDEL=3
giving a MROF at 33.33 BPS!!!
This is theoretical as every marker is slightly different, but why not try it and see
then the bolt open timing needs to be a bit longer, look in the manual, i cant rember which setting is the bolt open time but try uping it by 1 then try firing a ball until it works.