Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Etek4 probs

dazzer35

In My Scope? Smile!
Feb 11, 2012
479
24
38
Hello gents got a etek4 symptoms are

When first putting bottle on and connecting all fine when first pulled trigger air just kept coming out of the barrel stripped it down put back together and replaced exhaust valve but now there is not enough air pressure coming through stripped and cleaned or replaced all orings in sl3 reg and lpr HELP
 

dazzer35

In My Scope? Smile!
Feb 11, 2012
479
24
38
Ohh put it back together how manuel said excuse my ignorance rammer housing ??
 

dazzer35

In My Scope? Smile!
Feb 11, 2012
479
24
38
Sorry meant to say we turned it around other way and then leaking out of there
 

maxxon

Active Member
Feb 20, 2015
56
16
28
49
Espoo, Finland
So it's basically leaking down barrel? I don't quite understand how barrel leak and feedneck leak would be different.

You can take off the bolt, there's a single hole where the air comes from. Check if that's really the source of the leak.

If it's not the cup seal (exhaust valve), odds are you scratched one of the o-rings on the rammer housing during previous fix attempts.

Does it still cycle and shoot despite the leak?