Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

GA myth 2 reg slow leak

Pingu

Active Member
Aug 17, 2013
261
81
38
Leicester
Hi all,

I have a 1.1l carbon GA tank with a myth2 reg which has a very slow leak that cannot be heard.

Any advice? (Apart from buying a ninja reg as I know that one ;P)
I have no previous skill/knowledge of stripping/maintaing tanks or regs.

Thanks for any/all help,

Pingu
 

Evil Rich

Platinum Member Lifetime PMGWC #101
May 22, 2008
1,885
705
148
Northumberland
Stick the reg in a glass of water to pin point the leak via the bubbles

You can get rebuild kits and proper reg grease if you know what you're doing, if not don't touch ever
 

Pingu

Active Member
Aug 17, 2013
261
81
38
Leicester
Stick the reg in a glass of water to pin point the leak via the bubbles

You can get rebuild kits and proper reg grease if you know what you're doing, if not don't touch ever
Awesome. Once I get it refilled I will try to find the leak thanks :)
 

munduz

Birmingham Reflex
Dec 16, 2012
721
135
78
The Stone
Awesome. Once I get it refilled I will try to find the leak thanks :)
(Apart from buying a ninja reg as I know that one ;P)

I had the same problem with my G2, and after the dip test it I found it was coming from the gauge thread, even a bit of PTFE tape wouldn't solve it...

I decided on the ninja option in the end :)
 

Care_Bears

Bluey .. ... ...Teams :- Care Bears UK
Jul 7, 2007
1,792
598
148
Wiltshire
with the Myth reg , did you get the hollow allen key that normally comes with it, it goes over the pin to do up or undo , maybe that`s all it needs mate ??
 

Pingu

Active Member
Aug 17, 2013
261
81
38
Leicester
with the Myth reg , did you get the hollow allen key that normally comes with it, it goes over the pin to do up or undo , maybe that`s all it needs mate ??
Ooh. I purchased it second hand and came with no Allen keys. Will look into that too. Thanks mate
 

Care_Bears

Bluey .. ... ...Teams :- Care Bears UK
Jul 7, 2007
1,792
598
148
Wiltshire
I`ve found that some people got one and some people didn`t, because I was lucky to have received one i found if there was ever a leak it was to be tightened at the pin,
or to unscrew with that allen key to replace an "O" ring at the bottom of pin,
I`ve had dozens of these regs and they`ve all been great, very easy to work with.
as long as you`ve got the Hollow Allen Key.
Try Lips above Mate.
 
  • Like
Reactions: Pingu

nutz247

Member
Nov 3, 2009
34
9
18
near windsor
Another good way to find a leak coat it in soapy water little bubbles will appear. This is what I use at work for hunting gas leaks but we use fancy soapy water.