Planet Eclipse Warped Sports Manic Paintball Just Paintball G.I Milsim Tipmann BZ Paintball DYE Paintball

HELP! ion trouble!

Discussion in 'Tech Troubles' started by badd701, Sep 29, 2006.

  1. badd701 EGO = GOD

    badd701
    Joined:
    Jul 5, 2006
    Message Count:
    271
    Likes Received:
    0
    Trophy Points:
    26
    hey ive put a black heart board in my ion,
    gased up and go to shoot hit the triger and the gas that should shoot out the barrel shoots out a hole in a black plastic thing behind the trigger.
    i dont know how to fix it or even why its doing it please help as i need to use it on sunday.

    please help me :( :(
     
  2. lemonadeX Platinum Member

    lemonadeX
    Joined:
    Jul 31, 2006
    Message Count:
    1,340
    Likes Received:
    2
    Trophy Points:
    73
    You've probably blown one of the banjo fittings or internal hoses. Take the marker apart (assuming you know how?) and see if you can see anything wrong. Sounds like quite a big leak so should be obvious - Look at the front banjo fitting directly above the regulator and check the hoses over.

    -Will
     
  3. Statch83 in2deep-paintball.co.uk

    Statch83
    Joined:
    Jul 15, 2006
    Message Count:
    400
    Likes Received:
    0
    Trophy Points:
    26
    not entirely sure where you mentioned but swap the banjo's over and make sure the tubing to the board is securely on,whenever my ion leaks i do this and it usualy sorts it out.
     
  4. badd701 EGO = GOD

    badd701
    Joined:
    Jul 5, 2006
    Message Count:
    271
    Likes Received:
    0
    Trophy Points:
    26
  5. badd701 EGO = GOD

    badd701
    Joined:
    Jul 5, 2006
    Message Count:
    271
    Likes Received:
    0
    Trophy Points:
    26
    i cant find anything wrong with it just wonk work :( help
     
  6. Dark Stranger Shootin Blanks

    Dark Stranger
    Joined:
    Dec 14, 2004
    Message Count:
    2,138
    Likes Received:
    4
    Trophy Points:
    63
    Check in this order.

    Change battery

    Hoses are attatched to the correct barbs

    Remove clip around solenoid and ensure that poppit moves freely (do not lube)

    Failing that it could be a bad board.

    David
     
  7. badd701 EGO = GOD

    badd701
    Joined:
    Jul 5, 2006
    Message Count:
    271
    Likes Received:
    0
    Trophy Points:
    26
    Check in this order.

    Change battery- done no change

    Hoses are attatched to the correct barbs- checked and they are

    Remove clip around solenoid and ensure that poppit moves freely (do not lube)-done seems fine

    Failing that it could be a bad board.- it worked fine yesterday just took it apart to put new detents in put it bk together and it doesent work
     
  8. Dark Stranger Shootin Blanks

    Dark Stranger
    Joined:
    Dec 14, 2004
    Message Count:
    2,138
    Likes Received:
    4
    Trophy Points:
    63
    What is the pressure going into the marker? Needs to be sub 200 psi.

    The poppit is housed within the solenoid. You need to remove the goldy coloured clip from the noid to access.

    I had exactly the same fault with a low battery. So double check that.

    David
     
  9. badd701 EGO = GOD

    badd701
    Joined:
    Jul 5, 2006
    Message Count:
    271
    Likes Received:
    0
    Trophy Points:
    26
    done it it works but air still coems out the hole when it shoots is it ment to ?
     
  10. Dark Stranger Shootin Blanks

    Dark Stranger
    Joined:
    Dec 14, 2004
    Message Count:
    2,138
    Likes Received:
    4
    Trophy Points:
    63
    How much air? I believe it is supposed to vent a small amount of air.
    Its been a while since I pulled one appart!

    David
     

Share This Page

Planet Eclipse Warped Sports Manic Paintball Just Paintball G.I Milsim Tipmann BZ Paintball DYE Paintball