Hyper 3 reg

[TMB]

Hi peeps
Just cleaning the high pressure reg on my DM11, there seems to be allot of lube on the shim stack, should this be there or has it just gathered over time? Does the same apply to the LPR?

Thanks

 

[Marc0]

No it should be there !

 

[TMB]

Aha, I will replace all the lube I just cleaned off then.

Thank you Marco

 

[UG2]

Ye it should be there!

 

[DYE Euro Tech]

You want the shims as lubed as possible on both Hyper & LPR. Just make sure you put your shims back in the correct order, there should be 12 in total (13 if you've got an updated NT11) in the following order::-
()()()()()()

not!::-
)((()((() or anything random like that