Invert Mini- Upgrade Boards

[Bolter]

What are your current dwell and bip settings etc? What efficiency are you getting?

 

[Henry.B]

Actually, that's a good point, I've not checked... probably around 500-600 shots from a 3000psi 48cu tank

 

[Bolter]

And your board settings? Input should be a tick under 200psi, and i put dwell on 34-35, BIP at 6 for normal warm weather, but have wacked it way up to 25 for really cold weather. If you still get only 500 shots from a tank, could be you have a small leak somewhere, including it could be your air system with a leak.

something else to note is even 10% wear on an oring can cause issues, its not like they are all good till they just snap one day. Regularly (like 3 times a year if you play most months) change the orings on moving parts.

 

[Henry.B]

Ah, I see, thanks, I think it's time to strip them down and change the o-rings. I'll have a look at the board settings too

Cheers

 

[Kdc1980]

Good barrel kit !! I have the tech t delrin and spring set and each shot still spikes up and down !!

 

[Ben H]

A good barrel kit matched to the paint that your shooting, a clean marker internally, all o rings checked and greased as necessary, and a little fine tuning, the stock bolt is absolutely fine.