lol...stupid work pc's have no active speakers to stop the kids time wastingno
if ya have a look at the short vid on my post you hear it cycling but it has no power at all. It wouldnt shoot a matchstick down the barrel let alone a ball lol.
-ChEf
Ion leak
- Thread starter topchef
- Start date
Its basically cycling with air in it but it has no guts if ya know what I mean. The only noticeable other difference is the air being pushed/vented out of the grip frame during every trigger pull.lol...stupid work pc's have no active speakers to stop the kids time wasting
I guess I'll either buy a new board or send it to warped.
-ChEf
Stock dwell is 52 on a stock board.
Also try here for tech info;
http://www.ionowners.com/showthread.php?t=3216
Also may sound stupid but try a fresh battery
Also try here for tech info;
http://www.ionowners.com/showthread.php?t=3216
Also may sound stupid but try a fresh battery
tried four fresh batterys now!! (all procells)
Its not cycling at all. The bolt is not moving. The air gauge seems to drop with every trigger pull (only slightly then goes back up).
Gonna strip it back down in a sec cos its annoying the crap outta me now.
Been a LONG while since I had to MOT one of these things.
-ChEf
I've stripped it down and removed internals from body then wired it back up with air. It appears that when I fire it there is a sharp shot of air coming out the bottom of the noid. Is this normal?
-ChEf
-ChEf
could be a blockage in the solenoid or the rear banjo if the bolt is not moving.
have you tried dismantling and cleaning the solenoid assembly?
have you tried dismantling and cleaning the solenoid assembly?
I've had all the banjos off and blown them through, there all fine. will take solenoid apart now.
-ChEf
stripped the noid down, cleaned it up (not much to clean really) and still the same problem!
http://s81.photobucket.com/albums/j222/edmunds1707/?action=view¤t=MOV00057-1.flv
Will now do the reg, after that i'm buggered if I know lol cos thats everything stripped and cleaned.
-ChEf
tried mine and yes it does indeed vent air out the solenoid when fired - guess this must be normal - just never actually noticed in 2 1/2 years.....
need to now figure out why the bolt is not moving....
need to now figure out why the bolt is not moving....