Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Ninja Ultralite reg with no shims?

Stu_B

Active Member
Dec 16, 2016
58
13
28
30
Hi Guys

So I bought a Clone 5S and knowing that they like a low tank output I took my Ultralite apart to remove some shims to find that there was none in there!

This reg came on a used bottle and I'd never checked it before as it always shot fine on my Etha.

So does anyone know what sort of output my tank will be putting out with the Ultralite and no shims at all inside, just the spring?

Thanks
 

Stu_B

Active Member
Dec 16, 2016
58
13
28
30
Awesome cheers mate,

And it's safe to run with 0 shims as I thought I'd read it should always have 1 silver one in at least?
 

red dragon

red dragon
Mar 18, 2008
558
196
78
uk
I sure with all the shims out the UL Reg is putting out about 350/400 psi? Eclipse normally recommends 450/550 psi which is one shim as the UL Regs normally comes with 3 red shims hope this helps.
 
Last edited:

Stu_B

Active Member
Dec 16, 2016
58
13
28
30
Thanks!

I haven't got any of the shims anyway so as long as it's safe I'll keep it as is, the Etha has been running fine and the Clone needs the lower pressure so that's awesome