Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Proto Rail 2011 ASA problem

Cornelius

Active Member
Apr 11, 2012
156
11
38
30
Hey I have had the rail for just over a month now and the ASA has started to wobble from side to side and move. I've tightened the screw on it but that hasn't fixed I, I was wondering if anyone knew what could be done about it?
thanks
 

hello_moto

Well-Known Member
Feb 7, 2010
865
175
68
Birmingham
It's a throw away the stock ASA mate get a cp ASA or a on off ASA
really?!

whilst I concur that an on/off ASA would be a better upgrade, you haven't really addressed how to help Cornelius fix the problem.

If it's not the rail grip grub screw, then it's the actual rail itself.

Basically, you will need to pull off the stock ASA entirely to reveal the rail itself. The rail is secured by 2x hex screws on the underside of the UL grip frame. Tighten the sh*t out of these to prevent further wobble. Reattach ASA and secure in place by tightening the rail grip grub screw (IMPORTANT: do not over-tighten this grub screw as you will potentially pop its collar off the UL frame and that's a whole can of worms you don't want open!).