Reflex Rail HELP!

[Speeder]

BTW - I just spotted this in your manual:
• Check that the eye wire is properly connected
to the board. (could this be the case with your gun? Bad connectivity?)


• Change the battery. The eyes are normally
the first thing to stop working when a battery is dying.

• Next try to clean the eyes. See page 22 for
details on how to remove the Eye Pipe and
clean the eyes.
To test if the eyes work make sure there
is nothing inside the breech and that the bolt is
in the back position. Turn on the RAIL™, the
light should be red after the boot up sequence.
If it is, the eyes are working.

 

[Baggins]

Thanks Lads!

 

[Speeder]

Does that mean that your problem has been solved?

 

[Baggins]

Yes mate!

 

[Speeder]

Glad you got it sorted buddy.
Now I'm curious; Was it the Eye pipe/cover or the connectivity issue?

 

[Baggins]

connectivity not a clue why, its brand new haha

 

[Dup]

it can get knocked in transit or maybe it just wasnt connected properly at the factory As long as youve fixed it happy days!

 

[Richiemonk]

The slightest nick or bend in the eye wires can cause them to fail, uber fragile!