Wright Presure

[johnunleashed]

hi can some one sort out the problem i am haveing.
i have a dynasty shocker, and in the manual the in put presure in to the gun should be180-220,
now when i set my evil air presure to 220 the gun doe's not fire,only when i turn up the presure to 350psi does the gun fire if i put the presure up to 400psi the air then begins to leak from the bottom of the reg on the gun is this wright,should the presure on the evil be set to 350psi or do i have a fault,and if so on what the air or the gun.
many thanks if some one can help john

 

[Skeet]

Set the input to what it should be, then increase the Dwell or whatever you have to do, to get teh velocity, but do it over a chrono.

Did that link not help that I sent you?

 

[Scars]

The manual is reffering to pressure from the inline reg - pump about 500psi into your inline reg and turn the inline reg real low then gradually let the pressure into it until sounds like fireing truely - take to a chrono and continue dialing pressure up until shooting around 300fps which ideally should be around 190psi into marker - i ould recomend a guage and lpr manifold so you can put guages on - SP soliniods are easily blew

 

[johnunleashed]

presure

so it's ok to set the presure on the second gauge on the evil air systerm i have to about 400psi,thanks for your help lad's

 

[Scars]

Absolutely fine - jus dont go over 200 psi on the inline