Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Z2 feed issue

Pandamonium

Well-Known Member
Oct 10, 2012
495
58
48
A lot of us use Z2s and found that the majority of issues could be solved with a few simple things. Firstly, fresh batteries (which you've already done), secondly clean the hopper right the way through, which I assume you've also already done, and finally, try cleaning the rubber band belt thingy that drives the hopper from the motor. If you get any paint, gunk, mess or anything on this, it can slip and if you have a fully loaded hopper, it simply won't drive the plate. It's pretty easy to clean, just take the shell off, turn on the hopper and lightly press a cloth/tissue against the band. Your problem sounds a little more complex than this, but it's always worth trying, at the very least to rule this out as a potential cause! :)
ye the hoppers is spotless now from me thinking it was a simple issue and giving it a good clean (I cleaned so much paint out of the hard to reach places). sadly i think the board has had it and isnt a simple fix. thanks a lot for the hints though peeps
 
  • Like
Reactions: frobinson