$1.00 Low rise for vert feed Spyders

[PaintBaller630]

Check tins out, get a hose clamp, fit it onto the feed neck for your hopper (make sure it is a little bit loose). Then put the hopper onto your gun (Without the elbow) and tighten the clamp. Cut of excess if nesscisary.

Ill put a pic up if someone tells me hw

 

[Mark]

Originally posted by PaintBaller630
Ill put a pic up if someone tells me hw

You can't post pic's in Techroom unless you are a moderator, you can however link to pics but showing the pic without having to click on the link...moderators only .....the one forum where it actually is needed to be able to post pics to help others...

 

[jahlad]

yeah this is exacly how i used to attach the hopper on my r-feed cocker, hose clamp over the plastic elbow...sorted for 50p!

 

[Mark]

Paintballer630 is talking about JUST using a hose clamp and NO elbow. We all used hose clamps way back when before the thumbscrew type elbows were available.

 

[jahlad]

ah i see, yeah i suppose i can see that working too

 

[PaintBaller630]

Originally posted by Mark
Paintballer630 is talking about JUST using a hose clamp and NO elbow. We all used hose clamps way back when before the thumbscrew type elbows were available.

Thank you MArk for understanding me

 

[L J]

Originally posted by Mark
We all used hose clamps way back when before the thumbscrew type elbows were available.

ive still got a hose clamp on my pump ill use an elbow tho