Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

etha inconcistant chrono readings

trevor hook

Member
Mar 7, 2014
16
3
13
56
hi guys i`v just replaced my old poppet for the spring less one,cleaned and greased all o-rings ect after putting it all back together and test firing the chrono readings were going anywhere from 264 to 305 but before i changed it the readings were usually 294 to 297 any help please still a bit of newbie at this
 

Magic Rat

Swansea Draguns
Nov 21, 2012
1,213
287
118
Carmarthen
Last edited:
  • Like
Reactions: trevor hook

did243

Luxe/GOG Tech
Feb 17, 2012
625
72
63
hi guys i`v just replaced my old poppet for the spring less one,cleaned and greased all o-rings ect after putting it all back together and test firing the chrono readings were going anywhere from 264 to 305 but before i changed it the readings were usually 294 to 297 any help please still a bit of newbie at this
bad paint? bad bore match? dwell changed? not enough lube. too much lube, alot of variables that can play with FPS
 
  • Like
Reactions: trevor hook

trevor hook

Member
Mar 7, 2014
16
3
13
56
cheers for comments guys going to try again tomorrow using all tips given.i`ll let you know how i get on.
 

trevor hook

Member
Mar 7, 2014
16
3
13
56
hi guys i took the etha apart again re-cleaned and put a little less grease on, was a bit to much on before, all o-rings ok.i took it out to test with a new batch of paint and put 2 pods through it, checked it over the chrono and sorted all in the 280s so cheer guys. slowly learning as i go haha.