Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Tip x7

cmh1990

Active Member
Feb 23, 2013
72
4
28
33
Hi all I have a x7 while using it the other day it started to not re cock/ load balls after each shot and I had to manually cock it's when stripped down the air seemed to be running through with out any issues I did find a lot of paint inside the barrel (using and apex barrel) any one come across a similar problem as I can seem to find the issue :/ any help would be great thanks
 

Pingu

Active Member
Aug 17, 2013
261
81
38
Leicester
Check your cyclone feed :)
My Sierra did that and I stripped the cyclone down and put it all back together again and it was fine. It might have just loosened itself off so it wasn't cycling the ratchet in the base properly.

Also check your velocity (FPS)
 

Carney

Active Member
May 7, 2013
136
18
28
33
Wakefield, West Yorkshire
Hey man, are you still having this problem?, its happened to me before on my A5 and it was as simple as having too little air in my bottle, it was enough to fire but not spin the cyclone feed haha, if you haven't already fill your tank and try again ;)

Hope this helps