Ego Leak

[Stan]

As above... Loctite.

From the majority of your posts it sounds as though you don't have the technical know how to put PTFE tape on the threads neat enough to guarantee that you won't **** it up.

A small amount of Loctite thread sealant on the threads should be easy enough for you.

 

[aran]

Actually i was just tinkering about with it and i have found the macroline is too short therefore not going into the jaws properly i decided to move the rail forward. I put the tank in the asa and it shot fine just that it gets too wobbly so im just going have to get some new macroline after crimbo thanks for help guys

aran