Welcome To P8ntballer.com
The Home Of European Paintball
Sign Up & Join In

Eyes keep failing on demon HELP ME!!!!!!

cono111

Active Member
Jun 27, 2012
546
23
43
28
when i turn the gun on the eyes are on and working and detects a ball when its in the breach and as soon as i fire the screen had the eye error symbol
 

Mclovin101

Well-Known Member
Apr 3, 2008
4,099
367
118
What is your Eye sensitivity set to

Under the options settings on your board.
 

MeDiC

Well-Known Member
Dec 8, 2010
636
231
68
I think it might be your eye sensitivity, what are all the settings at ?

As above, when Foot sees the settings he should have an idea if they're out...
 

Mclovin101

Well-Known Member
Apr 3, 2008
4,099
367
118
The reason i ask i have had issues with creeds where the eye sensitivity is set to low

And the eyes are the same on both i bet its that

If its on 12 increase it to 15

I assume everything is all clean and not dirty
 
  • Like
Reactions: P8ballfreak666

foot

Now I originate.............
Jan 6, 2009
8,902
1,396
248
Crystal lake
when i turn the gun on the eyes are on and working and detects a ball when its in the breach and as soon as i fire the screen had the eye error symbol
As mentioned above, check your eye settings on the board.
Is the bolt cycling fully??

You may have a set of dodgy eyes?
 

WildWayz

The Moose God
Dec 19, 2004
1,695
507
148
45
Batley, Near Leeds
paintball.moose-shack.com
Aye - have you taken the marker apart? Seen something similar when someone had pinched the eye cable. Other thing you can do, is remove the eyes, connect them to the board and line them up loose and put your finger between them - see if they turn on and off to simulate a ball in the breach.
Also, any gunk in the eye hole area?
 

foot

Now I originate.............
Jan 6, 2009
8,902
1,396
248
Crystal lake
Aye - have you taken the marker apart? Seen something similar when someone had pinched the eye cable. Other thing you can do, is remove the eyes, connect them to the board and line them up loose and put your finger between them - see if they turn on and off to simulate a ball in the breach.
Also, any gunk in the eye hole area?
That can give a false reading as light may affect the sensitivity.(n)
 
Last edited: