Nt 11 doesn't work

[callum porter]

My nt11 us all gases up and when I try to shoot it it flashed green, this says in the manual it's the eyes but it's not as when I turn the eyes off it won't work and the bolt in the back doesn't come out far enough and you can push it completely in I have taken it apart and all looks fine

 

[CraigofScotland]

What is the reg pressure?


For clairty, he is talking about a marker which I sold him, fully tech'd, reg pressure 125psi, no inserts. Firing perfect on semi when sold.

 

[callum porter]

how do you check reg pressure

 

[CraigofScotland]

with the reg tester . . .

If you dont know how to set reg pressure, why did you take it apart?

 

[NitroBall]

change battery ?

 

[Ainsley]

Perhaps this would be better in the DYE section or Tech troubles?

 

[DYE Euro Tech]

check your dwell setting. Ideally you want it around 11/12. On top of this check all the inner bolt o-rings, change and lube them and replace the spool bumpers & spring. I'd recommend changing the spring and bumpers as they tend to wear down a fair bit. As Craig said check your reg pressure as well. All else fails you are welcome to send it in to us to have a look at. However please email me on eurotech@dyeprecision.com before sending anything in as I'll need to issue you an RA number and take some more details off you.

Cheers,
Nik

 

[KENDY]

Put a new Good quality battery in first then try it.

 

[DYE Euro Tech]

Have you had the update for the NT11?
Nik