Speed feed

[Lewy2005]

Hi purchased a Halo hopper a few weeks ago and came with a speed feed collar but cant seem to get my head around how it actually attaches on (locks onto the hopper)* so just have a quick question..

Whats the best way to attach a speed feed collar onto a halo?

Pic of the speedfeed collar below

http://thm-a03.yimg.com/image/ac8e85a388a7c5be

Thanks in advance

Lew

 

[spangley_special]

if you have regular shells it should just push on, if you have magnetic shells then you'll need to wrap the lip on the mouth with some electric tape to get it to fit tightly

 

[onasilverbike]

if you have regular shells it should just push on, if you have magnetic shells then you'll need to wrap the lip on the mouth with some electric tape to get it to fit tightly

Obviously you need to take the shells apart 1st and remove the lid. th 'spikey bit' goes at the front where the li hinge went!

 

[Lewy2005]

if you have regular shells it should just push on, if you have magnetic shells then you'll need to wrap the lip on the mouth with some electric tape to get it to fit tightly

Yea its a magnetic lid.. you mean some insulation tape?

 

[random08]

I had one of them screwed in on one of my reloaders, with tiny screws so its not really noticeable but stays on there like it had been super glued.

 

[spangley_special]

Yea its a magnetic lid.. you mean some insulation tape?

yup

 

[Lewy2005]

Cheers for the replys.. ill have a play when i get a min

Screws sounds like the best way

Thanks again