How to find out the PSI?

[LosingGrip]

Im not sure how i find out the PSI of the bottle im using.


Im using it on a VL Lynx.

 

[FirebirD]

Psi that the bottle holds? or psi through the gun?
Because both should be shown on gauges, gauge on the bottle is how much is in the bottle, gauge on the gun (if it has one) is the psi through the gun

 

[LosingGrip]

Lol, i dont have a gauge on either.

Is a gauge the only way i can finxd out/

 

[TimDC]

as a gauge is the device that tells you how much is in there yes

On a more helpful note.... depending how your site fills up air bottles, some fill rigs have gauges on them too

 

[LosingGrip]

My nearest one fills it up using gas tanks that shut off at a certain point, but there labeled in PSI which is why i ask.

Dont want to get the wrong one

 

[Gassy]

if your bottle doesn't have a guage are you sure its not co2 ?

 

[magicmonkey]

Lol, i dont have a gauge on either.

Is a gauge the only way i can finxd out/

Well without gauges... i should think you would find it pretty hard. lol
but yes mate, without a gauge you cant.(to my knowledge) unless when your filling, (if the fill rig has the function of reading the bottle PSI) and you fill the bottle and the gauge reads lets say 2500... thats how much you have in mate. but not pricey for a new reg for your bottle or indeed a whole bottle. worth the investment for a fiber wrapped one (if you have the cash)

someone please correct me if im wrong

 

[LosingGrip]

if your bottle doesn't have a guage are you sure its not co2 ?

It might be, to be honest ive got no clue what im talking about this would have been better off in the newbs forum.

 

[magicmonkey]

all them replies in the time it took me to type that!!! lol

if it is CO2 mate, then you can weigh it to find out how much you have. sounds like it is to me.

hope this helps

 

[LosingGrip]

It is c02 lol.