Alias solenoid Leak :(

[Tom Allen]

ring alpha, they're very helpful

 

[Graham-DV8]

I'm not totaslly sure what I'm asking for like

So I'm wanting a HEA10 F5?

Is that a seal then or the complete unit?

Graham

 

[Graham-DV8]

Originally posted by Graham-DV8
I'm not totaslly sure what I'm asking for like

So I'm wanting a HEA10 F5?

Is that a seal then or the complete unit?

Graham

DOH!!!!

Just looked on the side of the noid and it says "Humphrey HEA10 F5"

Cheer's Tom, I'll give them a ring forst thing 2moro

Graham

 

[Tom Allen]

the complete timmy solenoid is; HEA10F5-GL-101W. Alpha don't carry this one as it is a special, but the valve series is HEA10F5, so you will be able to get seal kits for that series.

 

[Graham-DV8]

Would you happen to know the name of the seal I'm wanting just so I can check to make sure its in the seal kit, or if they could just send a replacment seal out

Is it the Gasket seal btw?

 

[Tom Allen]

end plate gasket, i would have thought. I'mm having a look to see if there's a seal kit available

 

[Graham-DV8]

Originally posted by Tom Allen
end plate gasket, i would have thought. I'mm having a look to see if there's a seal kit available

Ok cool

 

[Tom Allen]

Nothing obvious for a seal kit, when you phone Alpha, you'll need to speak to someone technical.

 

[fatbeerboy]

alpha are helpful i spoke to someone there in my quest for a noid just a little expensive the standard valve is only £25 but the one in a timmy is a special so it cycles faster so about £85 in england!! I told you tom would be able to help