Suggestions for a headcam mounting system

[charlie A]

not 100% sure if this is the right place to ask, but I currently have a kodak playsport zx3 and was wondering if anyone has any suggestions or experience with making an adaptor to fit onto a mask? so I can get a headcam view rather than barrel cam which im doing at the mo which is getting a lot of ground.

the pictures below are of the mask and camera

any suggestions, or advice would be appreciated
cheers

 

[blackplasma]

My camera is mounted to my I4s with a picatinny rail mount and a short section of picatinny rail bolted through the side of the ear bit.
Picatinny rail acessories and mounts vary a lot so you may find one that can be modified to fit your camera but it isnt the easiest shape.
Try to avoid anything like cable ties or tape etc as it will lead to shake and wobble, go for bolts, screws and glue etc to reduce movement.

 

[Care_Bears]

If you would have it mounted to your gun barrel perhaps underneath try Halfords or any push bike shop that may have in stock a Light holder that goes on the bar under the seat, It`s around the same size as your barrel, Just an Idea ? very small and very light ...Bluey

 

[02crewcab]

just buy a go pro with head mount and barrel mount

 

[Care_Bears]

Oh come on ! ! what if he had a KODAK Brownie 127

 

[blackplasma]

just buy a go pro with head mount and barrel mount

or plasmacam 720

 

[Tom Allen]

Oh come on ! ! what if he had a KODAK Brownie 127

My god you must be older than me...

 

[renie]

if all else fails Gaffer tape